For almost 20 years Delphi have been producing high quality load pins to suit a variety of loading applications.
Measurement ranges of 100kg up to a massive 500t have been designed, machined, assembled and tested in our manufacturing facility on Queensland's Gold Coast.
Our load pins are well known within the crane, lifting and winch industries - thanks largely to the safety factor our designs - which typically exceeds 7:1 (minimum 6:1) to fall in line with rope safety factors in the lifting industry.
Many of our load pins are used to replace a pin in an existing machine or at the design/assembly phase of new equipment - often as part of a wedge socket, sheave or shackle.
Our custom build capability and short lead times are critical to our success.
|Load range||0.1 - 100 Tonnes|
|Accuracy||+/- 0.5% of range*|
|Repeatability||+/- 0.15% of range*|
|Pin Dia. tolerance||g6 (-0.02mm - 0.04mm)**|
|>300% (No damage)|
|Thermal effects||+/- 0.005%/°C on output or zero *|
|Termination||3106A 14S 6S 300 **|
|Material||630 Grade Stainless Steel|
|Full bridge strain gauge, (dual bridge optional).|
|4-wire standard, (6-wire optional).|
|Input resistance||760 ± 8% Ohms **|
|Output resistance||700 ± 0.5% Ohms **|
|Connection||Delphi 6 pin connector, M12 (optional), integral cable (optional|